Fitted it in a minute flat
No drill, no mess, and my landlord never needs to know.
4.4 · 2,100 reviews
The bathroom is where the falls happen
A pair of lever-lock suction handles for getting in and out of the bath. Thirty seconds to fit, no drilling, and they come off without a mark.
- Fits in thirty seconds: Press it flat, push both levers down. No drill, no screws, no landlord.
- Comes off without a mark: Lift the levers and it releases. No holes, no residue, no ring on the tile.
- Two in every box: One by the bath and one by the shower, which is where most people want them.
- Tells you when it is not gripping: Sway it hard before you trust it. If it shifts, it is the wrong spot.
Made in numbered batches. Batch 3 is the last at this price.
Batch 1
Sold out
Batch 2
Sold out
Batch 3 · final
68% reserved
Bought a pair for Mum's bath
She wanted something to steady herself stepping over the rim. This did it.
The tile test saved me
Our ensuite is textured. Went in the main bathroom instead, holds perfectly.
It grips smooth non-porous surfaces: glossy ceramic tile, glass, mirror, acrylic, smooth PVC and smooth steel. It will not hold on textured or matt tile, painted or papered plaster, small mosaic tile, natural stone, or anywhere the cup would span a grout line. Tiles need to be about four inches square or larger so each cup sits inside one tile.
If you are unsure, that is what the sway test is for - and it takes ten seconds.
It is balance assistance. Something to steady yourself against while you step over the rim of a bath or turn around in a shower. It is not a weight-bearing grab rail and it is not a substitute for one. If you need something to take your full weight or pull yourself up on, you need a bar screwed into the studs, and no suction product is that.
We would rather say so here than have you find out in the shower.
Clean the tile and dry it completely - a wet or dusty surface is the most common reason a cup will not seal. Position the bar so each cup sits flat within a single tile, press both cups firmly to the wall, then push both levers down. Look along the rim: there should be no gap anywhere between the rubber and the tile.
Then sway it hard, before you trust it with anything.
Suction is not permanent and it does not fail politely. Give the bar a firm push down and sideways once a week - it takes seconds. A cup that is starting to let go will move slightly or show a widening pale ring at the rim before it releases. If it moves at all, take it off, clean both surfaces and refit it.
Most of the failures people report in this category are a seal nobody re-tested after the first day.
No. There are no holes, no adhesive and no glue. Lift the levers and it comes away. You may see a faint ring of trapped moisture for a few minutes after removal, which wipes off.
That is the whole reason people choose suction over a drilled rail in a rented flat.
Anybody who needs to take real weight on a rail - after a hip replacement, with significant mobility loss, or if a fall is likely rather than possible. In those cases fit a drilled grab rail into the wall studs, and ask an occupational therapist where it should go.
This is a steadying handle. It is genuinely useful and it is not that.
It is almost never a dramatic fall
It is a foot that does not quite clear the rim of the bath, or turning round in a cubicle with your eyes shut and one hand already out looking for something that is not there. The bathroom is the room with the hardest surfaces, the least space and the most water, and most people manage it for years by putting a hand on a towel rail that was never meant to take one.
A fixed point to touch changes the odds more than it looks like it should. Not something to hang from - something to put a hand on while your weight moves from one foot to the other.
That is the whole job, and it does it well.
4.4 out of 5 · 2,100 reviews
Press it flat, push the levers down
Each cup has a lever beside it. With the lever up the cup sits loose against the wall; push it down and it draws the air out from under the rubber and pulls the cup tight to the surface. The whole fitting takes about thirty seconds a bar, and the only thing that matters is that the tile underneath is clean, dry and flat, with the cup sitting inside a single tile rather than bridging a grout line.
For steadying, not for hanging off
The moment this earns its place is stepping over the rim of a bath, or turning around in a shower cubicle with your eyes shut and shampoo running. That is what a hand on a fixed point is for - it stops a wobble becoming a stumble. It is not there to take your body weight, and a page that told you otherwise would be setting you up.
Off again in a second, no holes
Lift both levers and the cups release. Nothing is glued, nothing is screwed, and there is nothing left in the tile - which matters in a rented flat, and matters again if you decide the bar would be better six inches further along. Most people move theirs at least once in the first week before settling on a spot.
What a seal looks like before it lets go
It warns you, if you know what to look for
This is a cup that is still holding, and is about to stop. The dark band around the rim is where the rubber is still sealed; the pale crescent creeping in on one side is air that has got underneath. It is visible for days before anything gives way, and it is the reason the weekly push matters - the failures people report in this category are almost never sudden, they are just unwatched.
Not a claim about your bathroom - the one thing you can check in it before you trust anything.
From box to fitted, and what to do after
Bathrooms differ. This is the shape of it, not a promise about yours.
Out of the box
Two bars, no tools, nothing to assemble.
Minute one
Pick the spot. Each cup needs to sit flat inside one tile, clear of grout lines.
Minute two
Clean the tile, dry it properly, press both cups on and push the levers down.
Before you trust it
Sway it hard, down and sideways. If it shifts at all, clean and refit somewhere flatter.
Week one
Most people move theirs once, having found a better spot or a flatter tile.
Every week after
Ten seconds. Push it, feel that it holds, carry on. That habit is the whole difference.
What people say
4.4 average from 2,100 people
It went on in a minute and it comes off without a trace.
Verified buyer
The surface list is the reason I bought from here.
Verified buyer
Steadies me getting over the bath rim, which is all I wanted.
Verified buyer
Checked it every Sunday since. Still solid.
Verified buyer
Questions
If the surface is smooth, non-porous and flat - glossy tile, glass, acrylic, smooth PVC - yes. Textured or matt tile, paint, plaster, mosaic and natural stone will not seal. Each cup also needs to sit inside a single tile rather than bridging a grout line.
We do not publish a figure, and we would be careful with anyone who does. It is balance assistance - a handle to steady yourself with. If you need something to take your full weight, fit a drilled rail into the wall studs.
Once a week, and it takes ten seconds. Push it down and sideways. Suction is not permanent, and a seal that has started to go will move before it lets go.
No holes, no adhesive. You may see a faint ring of moisture for a few minutes after taking it off, which wipes away.
Yes, as many times as you like. Lift the levers, clean both surfaces, press it on again. Most people reposition theirs at least once in the first week.
2,100 people, 4.4 average
Pauline R. · August 2026
Verified Buyer
Exactly what I needed to get over the bath rim
I am steady on my feet but the step over the side of the bath had started to worry me. This gives me something to put a hand on. It went on the tile in about a minute and it has not budged. I test it every weekend the way the page says.
Suction Grab Bar - Something Solid to Hold Where the Floor Is Wet · Was this helpful?
38 0
Gerald M. · August 2026
Verified Buyer
Honest about where it works, which is why I bought it
Every other listing I looked at just said heavy duty. This one told me it will not hold on textured tile, and my ensuite is textured. Saved me a return. Put them in the main bathroom instead and they are solid.
Suction Grab Bar - Something Solid to Hold Where the Floor Is Wet · Was this helpful?
51 0
Denise A. · July 2026
Verified Buyer
Bought for my mother, fitted them myself
She is 79 and did not want a builder in. Took me five minutes to do both, no drill, no mess. I showed her the sway test and she does it herself now. Good peace of mind for what it costs.
Suction Grab Bar - Something Solid to Hold Where the Floor Is Wet · Was this helpful?
44 0
Mark T. · July 2026
Verified Buyer
Comes off cleanly, which mattered to us
We rent, so nothing goes into the tile. These come off with a flick and leave nothing behind. I moved mine twice before I found the right height.
Suction Grab Bar - Something Solid to Hold Where the Floor Is Wet · Was this helpful?
26 0
Sylvia B. · June 2026
Verified Buyer
Good for balance, and be clear that is what it is
It does steady me and I am glad I bought it. I would say do not expect to hang off it - it is a handle to touch, not a rail to pull on. Once I understood that I have been happy with it. Refitted one after about six weeks when it felt slightly loose.
Suction Grab Bar - Something Solid to Hold Where the Floor Is Wet · Was this helpful?
31 0
This is a balance-assistance handle for smooth non-porous surfaces. It is not a weight-bearing grab rail, not a medical device, and not a substitute for a drilled rail fitted to wall studs. Check the seal before each use and refit if it moves. Not suitable for textured, painted, porous or curved surfaces. Keep out of reach of children.
Puracle Suction Grab Bar